Thin durable plastic film for better adhesion of 3D printing. Works perfectly on most common 3D printing materials. It replaces alternatives such as blue tape or BuildTak.
Prints adhere perfectly to the surface without deformation. The surface of the print on the printing pad is matte and the layers are lost, as with grainy printing pads. No additional adhesive is required for printing with this pad, however, for greater success, it is advisable to use 3DLAC.
Suitable for materials:
PLA
PET / PET-G
ABS
ASA
CPE
TPU
Information</strong >
The pad can be used up to 120 °C.
Pad thickness: 0.5 mm
The pad can be glued to any material, degrease the surface before sticking
The pad can be combined with glass base and thus becomes removable
