Screw for connecting profiles - Sharpsystem connecting profiles - Thread: M5
Screws suitable for use in the groove of the profile, ideal for fast and strong connections More
Simple and functional profile joining system
Connecting material for profiles is often expensive or unsuitable for a specific application.
That's why we came up with a solution that will facilitate installation without losing strength and drastically reduce the price.
The animation shows how to use the system. However, you can screw the screw into the profile first and then just put the second one on and tighten it, making handling easier.
It is necessary to choose the correct size of thread and hole for tightening, the values are written in the table below:
| Product variants: | M5 | M6 | M8 |
| For profile: | 20xx - 5 mm | 20xx - 6 mm | 30xx and 40xx - 8 mm |
| Profile thread: | M5 x 0.8mm | M6 x 1mm | M8 x 1.2mm |
| Thread length: | 25 mm | 30 mm | 30 mm |
| Drill diameter: | 5 mm | 6 mm | 8 mm |
|
Distance of the hole from the edge: (optional, for frame construction) |
10 mm | 10 mm |
15mm / 20mm 30xx / 40xx |
|
Allen key size: |
3 mm | 4 mm | 5 mm |
Advantages (compared to other angle couplings):
- Low price
- High strength
- Quick installation
- It will not fill the inner groove
- Scalability
Disadvantages (compared to other angle couplings):
- The need to drill a thread and a hole in the profile - Don't know what to do? We will be happy to make threads and holes in your profiles.
- The position of the joint is determined by the drilled hole, so the entire structure needs to be designed first - Don't know what to do? We will design the entire structure for you according to your requirements.
Related products3
Thread in the profile - Sharpsystem connecting profiles
Hole in the profile - Sharpsystem connecting profiles
