Plug for profile 40x40, hole 8 mm - Color: Black

End cap for modular profiles

This end is suitable for all 40x40 mm profiles with a central hole of 7.5 - 8 mm.

The end cap has an 8 mm wide "peg" - so it needs to be installed in profiles with an 8 mm groove, or the peg needs to be cut before installation.

Installation:

• Attach the blank to the hole of the profile with a pin and align the sides with the side of the profile
• You squeeze it as deep as your hand can handle
• By banging the profile against a firm, smooth surface, or by banging it with a rubber stick
• you push the end all the way into the profile

Parameters:

• Size: 40x40 mm
• Pin length: 8 mm
• The thickness of the end cap: 4 mm

Compatibility:

• The end cap is compatible with any 40x40 mm profile, and a central hole of 7.5 - 8 mm
• We only guarantee compatibility with the 4040 profile, groove 8 mm, which we have in our offer