Filament PM 1,75 PLA - Copper 2 kg

PLA copper filament 2kg, Czech manufacturer Plasty Mladeč. The PM brand is a guarantee of the quality and dimensional accuracy of the PLA filament. The material is biodegradable and suitable for printing large objects. Next to PET-G filament, it is the most used material for 3D printing. Prints at temperatures above 50°C may lose their mechanical properties

Recommended printing settings for PLA filament PM:

• Nozzle: 200 - 220°C
• Printbed: 50 - 60 °C

Printing settings depend on the printer and the printing substrate. PLA filament can be printed even without heating the bed.

Parameters:

• Tolerance: 0/- 0.05 mm
• Coil outer diameter: 202 mm
• Coil inner hole: 50 mm
• Coil width: 90 mm

Tips for PLA filament

• How to surface finish PLA?
• How to glue PLA?
• How to store and dry filament?

ADVANTAGES:

• simple setup for printing
• biodegradable material
• hardness and toughness
• small print shrinkage
• suitable for printing larger models
• soluble in sodium hydroxide

DISADVANTAGES:

• fragility low heat resistance (softens at a temperature of 50 °)
• unsuitable for outdoor use
• it grinds worse