Aluminum profile 20x20 mm, groove 5 mm; custom cut

Aluminum construction profiles 2020 (20 mm), groove 5 mm according to the selected length in mm.

A 20x20 mm aluminum profile can be added to the basket based on the specified length.

Profile parameters

• Groove: 5mm
• Core diameter 4.3 for M5 thread.
• Cut tolerance: +/- 0.5 mm
• Material: Light aluminum alloy - EN AW-6063
• Manufacturing tolerance: DIN EN 12020- 2
• Color: Aluminum (Silver)
• Weight: 0.49 Kg/m

Accessories and fasteners

To the construction profile 2020 with a groove of 5 mm is suitable this Accessories for AL profiles (type profile 20 mm). However, classic hammer nuts cannot be used, as a substitute you can use square nuts M5. The 5 mm groove also fits stones with brake. Other accessories: Corner connectors and angles - most often used to connect profiles to each other Covers, handles , legs, washers and other accessories...

Transport of aluminum profiles

Aluminum profiles often exceed the limits of common carriers. Please keep in mind the following carrier limits when choosing transport.

• Packeta  - maximum length of profiles approx. 650 mm
• DPD - maximum length of profiles approx. 1650 mm
• GLS - maximum length of profiles approx. 1980 mm
• Longer profiles can only be sent by TopTrans or Raben

All current options can be found in the basket when ordering, or a custom offer can be prepared for larger orders.

According to Act 89/2012 Coll. § 1837 letter D this item is non-returnable